View DTD113ZU_1235223.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DTD113ZK / DTD113ZU / DTD113ZS
Transistors
500mA / 50V Digital transistors (with built-in resistors)
DTD113ZK / DTD113ZU / DTD113ZS
Applications Inverter, Interface, Driver
External dimensions (Unit : mm)
DTD113ZK
(3)
2.9 0.4
1.1 0.8
Features 1) Built-in bias resistors enable theconfiguration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors negative biasing of the input. They also have the advantage of almost completely eliminat ing parasitic effects. 3) Only the on/off conditions need to be set for operation, making the device design easy.
(2)
(1)
1.6 2.8
0.95 0.95
0.15
1.9
ROHM : SMT3 EIAJ : SC-59
Each lead has same dimensions
Abbreviated symbol: G21
DTD113ZU
2.0 0.3
(3)
0.9 0.2 0.7
1.25
Structure NPN epitaxial planar silicon transistor (Resistor built-in type)
ROHM : UMT3 EIAJ : SC-70
(2)
(1)
2.1
0.65 0.65 1.3
0.15
Each lead has same dimensions
Abbreviated symbol: G21
Packaging specifications
Packaging type Code
Part No. DTD113ZK DTD113ZU DTD113ZS - - -
(15Min.)
T146 3000
T106 3000 -
TP 5000 - -
ROHM : SPT EIAJ : SC-72
Basic ordering unit (pieces)
3Min.
Taping Taping Taping
3.0
Package
SMT3 UMT3
SPT
DTD113ZS
4.0
2.0
0.45
2.5 5.0
(1) (2) (3)
0.5
0.45
Abbreviated symbol : D113ZS
(1) GND (2) OUT (3) IN
Equivalent circuit
R1
OUT
IN
R2
GND
IN GND
OUT
R1=1.0k, R2=10k
Rev.B
0.1Min.
0.3Min.
(1) GND (2) IN (3) OUT
(1) GND (2) IN (3) OUT
1/3
DTD113ZK / DTD113ZU / DTD113ZS
Transistors
Absolute maximum ratings (Ta=25C)
Parameter Symbol VCC VIN IC PD Tj Tstg 200 150 -55 to +150 Limits DTD113ZU DTD113ZK DTD113ZS 50 -5 to +10 500 300 Unit V V mA mW C C
Supply voltage Input voltage Output current Power dissipation Junction temperature Storage temperature
Electrical characteristics (Ta=25C)
Parameter Symbol VI(off) VI(on) VO(on) II IO(off) GI R1 R2/R1 fT Min.
-
Typ.
- -
Max. 0.3
-
Unit V V mA A
-
Conditions VCC=5V, IO=100A VO=0.3V, IO=20mA IO/II=50mA/2.5mA VI=5V VCC=50V, VI=0V VO=5V, IO=50mA
- -
Input voltage Output voltage Input current Output current DC current gain Input resistance Resistance ratio Transition frequency
1.5
- - -
0.1
- - -
0.3 7.2 0.5
-
82 0.7 8
-
1 10 200
1.3 12
-
k
-
MHz
VCE=10V, IE=-50mA, f=100MHz
Characteristics of built-in transistor
Rev.B
2/3
DTD113ZK / DTD113ZU / DTD113ZS
Transistors
Electrical characteristic curves
100 50
10m
VO=0.3V
OUTPUT CURRENT : Io (A)
5m 2m
VCC=5V
1k 500
VO=5V
Ta=100C 25C -40C
INPUT VOLTAGE : VI (on) (V)
20 10 5 2 1
DC CURRENT GAIN : GI
2.0 2.5 3.0
1m 50 200 100 50 20 10 5 2 1
200 100 50 20 10 5 2
Ta=-40C 25C 100C
Ta=100C 25C -40C
500m 200m 100m 500 1m
2m
5m 10m 20m
50m 100m 200m 500m
0
0.5
1.0
1.5
1 500 1m
2m
5m 10m 20m 50m 100m200m 500m
OUTPUT CURRENT : IO (A)
INPUT VOLTAGE : VI (off) (V)
OUTPUT CURRENT : IO (A)
Fig.1 Input voltage vs. output current (ON characteristics)
Fig.2 Output current vs. input voltage (OFF characteristics)
Fig. 3 DC current gain vs. output current
1 500m
lO/lI=20
OUTPUT VOLTAGE : VO (on) (V)
200m 100m 50m 20m 10m 5m 2m 1m 500 1m
Ta=100C 25C -40C
2m
5m 10m 20m
50m100m200m 500m
OUTPUT CURRENT : IO (A)
Fig.4 Output voltage vs. output current
Rev.B
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of DTD113ZU

	To Download DTD113ZU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .